Della & Delle Henna Softener: Lighten, Clean Up and Create Ombré Brows

What the Della & Delle Henna Softener does

A henna softener gives you control after the colour is on. The Della & Delle Henna Softener (30 ml) acts on the intensity of brow henna: it softens and lightens the result and helps remove stains and excess henna around the design. Clients and artists also search for it as “Della Delle henna softener”.

The short answer: use it right after you have removed the henna, with a cotton-tipped stick or a brush, to lighten a brow that came out too strong, clean up the outline, build an ombré effect or neutralise a greenish tinge. There is no need to remove it afterwards.

The range is arriving soon at Brow Lash World. You can sign up for the stock alert on the product page, and you will find the whole brand on the Della & Delle brand page.

What it is used for

• Softening and lightening: it reduces the intensity of the henna for a more natural finish.
• Cleaning up: it removes stains and excess henna around the design for a crisp outline.
• Ombré effect: it is described by the manufacturer as ideal for creating a gradient.
• Greenish henna: it can neutralise henna that has turned greenish.

The formula is gentle on hairs and skin, and a small amount is enough. According to the manufacturer it is cruelty-free, vegan and PETA certified.

When to use it

The softener belongs at the end of the treatment, right after the henna has been removed with damp cotton. At that point you can see the real result on hairs and skin and decide whether it needs adjusting. As a rule, it is easier to judge the colour once the excess has been wiped away than while the henna is still on.

It also works on henna stains outside the brow area, for example on the temple or the skin above the brow, using the same method.

How to use it, step by step

1. Right after removing the henna, moisten a cotton-tipped stick or a brush with the softener.
2. Rub lightly over the area you want to soften or clean up.
3. Alternatively, put a drop directly on the skin and rub gently with cotton or a spoolie until you reach the effect you want.
4. Leave it as it is. There is no need to remove it from the skin afterwards.

Ombré brows with the softener

An ombré brow is usually softer and lighter at the beginning of the brow and gradually deeper towards the arch and tail. With henna, you can place the colour as usual and then use the softener to fade the start of the brow.

As a rule, work in light passes and check the result after each one. It is easy to lighten a little more, but you cannot easily put the colour back. A small, precise brush such as the Safira Henna Brush helps you stay on the area you want to fade.

Fixing a result that is too dark

Even with experience, a shade can develop stronger than planned. The softener lets you lighten the result in steps instead of starting over. Apply it, rub lightly, wipe and look at the brow in daylight before you continue.

Be realistic with the client: the softener lightens and softens, it is not a promise of a complete reset. Follow the product instructions, and do not apply it to irritated or damaged skin.

The best fix is prevention. The development time of the Della & Delle Brow Henna runs from 5 to 45 minutes depending on the intensity you want (Black Intense: 3 to 45 minutes), so a shorter time gives a softer result. Mixing shades also helps you reach the right tone before you start.

Where it fits in the henna workflow

The order is simple: skin prep, mixing, application, development, removal, then the softener for clean-up and ombré, and finally a highlighter for the contour. Our full procedure is in the guide henna brows step by step, and the shades and jar sizes are explained in the article on the Della & Delle Brow Henna.

Always do a patch test before using henna: apply it to the forearm for 3 hours, then watch the area for 48 hours, and repeat the test before every application. Store the softener in a cool place away from strong light and out of reach of children. If it gets into the eyes, rinse immediately with water; if irritation occurs, stop use and seek medical advice.

FAQ

Do I have to remove the softener from the skin?

No. According to the how-to, there is no need to remove it from the skin after use.

Can I use it on henna stains outside the brow?

Yes, the manufacturer says it can be used the same way on henna stains outside the brow area.

Can it neutralise a greenish tinge?

Yes, it can neutralise henna that has turned greenish. Work in light passes and check the result as you go.

Does it remove henna completely?

It softens and lightens the intensity and removes stains and excess henna. Treat it as a tool for adjusting a result, and follow the product instructions.